Practical guide
NFPA 13, 20 and 25: coordinating water and fire alarms
Distinguish design, installation and maintenance of water-based systems and document fire alarm interfaces.

Water-based fire protection and fire detection and alarm have different equipment and responsibilities. BBS recommends identifying which system produces each signal, who maintains the source equipment and who validates the overall response before planning an assessment.
What each reference addresses
| Reference | Area | Starting evidence |
|---|---|---|
| NFPA 13 | Sprinkler system design and installation. | Approved engineering and drawings. |
| NFPA 20 | Installation of stationary fire pumps. | Pump assembly configuration and documentation. |
| NFPA 25 | Inspection, testing and maintenance of water-based protection. | Inventory and maintenance records. |
| NFPA 72 | Fire alarms and signalling. | Sequence, events and interface records. |
From hydraulic equipment to a building event
Prepare an interface list showing the identifier, location, source equipment, receiving point and expected response. Waterflow and valve supervisory conditions serve different functions; their treatment must be checked against the design and applicable requirements. A panel indication does not replace evaluation of the hydraulic equipment.
- Check point descriptions against drawings and actual field equipment.
- Identify local reception, remote supervision and power and communications dependencies.
- Record testing of the source equipment separately from validation of its fire alarm signal.
Prepare the scope and contingencies
Separate hydraulic assessment, pump maintenance and alarm interface work in the agreed scope. Water availability, valve conditions and potential protection impairments require coordination with the building’s responsible person. The test procedure must address temporary measures, permissions, responsibilities and restoration of normal operation.
Frequencies, flows, pressures and methods must come from the applicable edition, engineering, installed equipment and manufacturer instructions. A generic checklist is insufficient. A refurbishment or change of use may require a design review in addition to maintenance of the existing system.
Evidence at handover
Request component-level results, interface evidence, test limitations, outstanding conditions and prioritised actions. Both disciplines must validate their own scope. A successful fire alarm test alone does not certify the capacity of the suppression system.
How BBS organises the work
- Initial assessmentInventory, fault history and criticality.
- Intervention planScope, permissions, owners, contingency and acceptance.
- Execution and testingChange control and verification of authorised interfaces.
- Handover and follow-upEvidence, validated results and outstanding actions.
Sources and scope
Public reference sources checked on 5 October 2026. This BBS guide provides planning recommendations; applicable editions and requirements must be validated for each project.
LET’S TALK

